Products By Manufacturer OMG Insulation Adhesives NightShot


NightShot is a fast acting, dual-component, polyurethane foam designed to form a temporary seal between new roof covers and existing roof systems. NightShot is dispensed through a portable 1:1 applicator and adheres to all types of roofing systems, including TPO, EPDM, PVC, Built-up and Modified Bitumen.  NightShot is not a substitute for fasteners and will not resist wind uplift forces.  The membrane must be held in place with temporary ballast.

Features & Benefits

Each case contains 4 – 1,500 ml cartridges.  Each case provides 91-121 linear meters of tie-in.


NightShot is applied in a single band where the old roof surface meets the new roof system. The NightShot must be allowed to rise prior to pressing the new roof membrane into the foam.  Care must be taken to insure that the new membrane is in full contact with the NightShot and that there are no voids or fish mouths along the edge of the membrane.  Contaminated membrane and NightShot must be cut away prior to continuing with the application of the new roof.  NightShot must be kept at room temperature and must not be applied when the deck temperature is below 40 degrees F.  Roof surface must be clean, dry, and free of all loose gravel and dirt.

MSDS36.25 KBDownload
Leaflet489.96 KBDownload
Product Video
Copyright (c) 2024 Mak Fastener Specialists LTD Privacy StatementTerms Of Use
OlyBond500 SpotShot SpotShot Cordless Applicator NightShot